Home Home & Garden 8 Tips to Make that Diy Plumbing Job a Breeze

8 Tips to Make that Diy Plumbing Job a Breeze

Most Plumbing repairs and fixture updates can be done by yourself at home if you have the know-how and the right tools. It is as essential to know the difference between various pipes, glue and tapes as it is to have the correct set of tools for the job. DIY projects could still throw up a few problems along the way.

Here are 8 ways to avoid the most common DIY plumbing mistakes

Have the Right Tools

Professional plumbers finish the job with ease as they have specialized tools for the job. Using the wrong equipment can cause you to break pipes and valves and cause more leaks. Invest in an inexpensive set of plumbing tools to help you prevent more damage.

Always Keep Spare Parts

Many DIYers start a project only to realize midway that they don’t have all the spare parts required. It can be easy to forget to pick up washers and stem seals when trying to repair or replace a faucet. Peripheral parts are cheap, so stock up on spares to save valuable time and another trip to the store.

Shut Off the Water Supply

The water supply to the part being repaired must be turned off. Full water pressure hampers reattaching a new faucet or valve and could cause a flood. Take a tip from experienced plumbers and shut off the water supply before you start. 

Don’t Be Too Hard on A Stuck Shut Off Valve

Non-use over long periods tends to cause shut off valves to get stuck. Using too much muscle on a stuck valve could break the valve and the knob also. Using an adjustable wrench tool to gently loosen the joint helps overcome this problem.

Use Teflon Tape Correctly

Wrapping tape must be applied clockwise along the threads to work well. If it is wrapped backward, it unwinds as the fitting is tightened. This defeats the purpose of using the tape as it then cannot create a seal.

Don’t Over Tighten Joints

Overtightening joints on coupling, black or galvanized pipe, tees or elbows could lead to a cracked fitting. Overtightened toilet bolts or joints could cause weakening of the structure and leaks even weeks later.

Use Drain Cleaners Sparingly

Most DIYers use liquid drain cleaners as a first choice to unclog a stuck sink. These are corrosive liquids and could cause more damage to metal traps, fittings and gaskets if overused. The most effective way to clean bath and kitchen sink clogs is to use a barbed drain cleaning tool or a snake.

Dry out Copper Before Sweating

If copper pipes are not dried entirely before sweating, the joint will leak. To ensure this does not happen, the pipe should be plugged with a special tool or white bead before heating.

As long as you keep these tips in mind, you should be able to tackle most plumbing issues at home while avoiding common DIY mistakes. If the damage is extensive or the project is large, consider calling in the professionals. Good luck!

Comments are closed.